Cable Compound

TANYA CABLE COMPOUNDS are manufactured from selected grades of bitumen and conform to IS 7084-1973 and BS 1858-1973, specification for bitumen based filling compounds for electrical purposes.

TANYA CABLE COMPOUNDS, being of very low water vapour permeability, insolubility in water and subsoil chemicals, resistance to weathering and to chemical attack give a high performance for electrical application. Its characteristics include low contraction on cooling and an unusually good combination of high softening point, adhesiveness and mechanical strength. It is not only a low cost material but also has adequate balance of temperature, humidity, cleanliness and surface smoothness.

TANYA CABLE COMPOUNDS rate classified as follows and the uses of the material suitable for voltage stability be selected accordingly in consultation with. IS:7084-1973 and BS: 1858-1973.

USES:
TANYA CABLE COMPOUNDS are particularly suite for accessories operating at high temperatures. They can be used as filling materials for cable jointing for protection of cable box joints (of both electricity and telecommunication) from moisture, water and other environmental chemicals so as to avoid failure in the system and hazards to human life. They can also be used for busbar filling and impregnating insulation tapes.

APPLICATION:
Before application the material is melted in a container and the temperature is to be raised to application temperature under slow stirring. The pouring temperature is to be decided as per the code of practice of application which is decided by the applicator without affecting the characteristics of the filling compounds, and also as per the agreement between purchaser and manufacturer wherever necessary. In no way the material is to be over burnt. The quantity is to be taken in such a way that the entire quantity melted can be used up.

QUALITY ASSURANCE:
As per ISO-9001 : 2008

PACKING:
20 kg & 150 kg

SPECIFICATION OF CABLE COMPOUND: